211
ENGINE
211
CHECKING THE VALVE TIMING
Engine: RFN
Checking the timing (continued).
Suspend the engine, using a workshop hoist.
Remove the engine support (2) and the timing cover (1).
Peg the camshaft pulleys, using tool [1].
NOTE: The pegs [1] should go in without forcing.
WARNING: If the pegs go in only with difficulty, repeat the operation for fitting and tensioning
the timing belt
(see corresponding operation)
.
Complete the refitting.
B1EP1GTC
B1EP1GUC
C4
To Next Page
Loading...
