170
ENGINE
AUXILIARY EQUIPMENT DRIVE BELT
Without power-assisted steering
Tool.
[1] Belt tension measuring instrument : 4122-T
Removal.
Loosen the screws (2).
Tighten the screw (1) until it is against its stop.
Remove the belt.
Refitting.
Refit the belt.
Fit the tool [1] on the belt at "d".
Tighten the screw (1) to obtain: 106 ± 10 SEEM units.
Tighten the screws (2) to 2 m.daN.
Remove the tool [1].
B1BP1SECB1BP1SDC
Engine: WJY
XSARA