193
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine: NFU
Tools.
[1] Belt tension measuring instrument : 4122-T
[2] Flywheel locating peg : 4507-T.A
[3] Camshaft pulley locating peg, exhaust : 4533-T.A C2 Tool kit 4507-T
[4] Camshaft pulley locating peg, inlet : 4533-T.A C1
[5] Tensioning tool : 4707-T.J
Checking the valve timing.
Peg the flywheel using the tool [2].
Peg the exhaust camshaft pulley [3].
Peg the inlet camshaft pulley [4].
Setting the valve timing.
Peg the flywheel using the tool [2].
Peg the camshaft pulleys [3] and [4].
B1EP11CC
B1EP11BC
XSARA
To Next Page
Loading...
