177
ENGINE
XSARA - XSARA PICASSO
AUXILIARY EQUIPMENT DRIVE BELT
Engines: RHY - RHZ
Without air conditioning (continued)
Refitting.
Re-used belt.
Compress the tensioner roller (2) by action at «a»
(in anti-clockwise direction)
, tool [4].
Refit the belt.
WARNING: Respect the belt-fitting direction.
Remove the tool [4].
New belt.
Refit the belt.
Turn the eccentric roller (3), tool [1]
(clockwise)
to free the tool [2] from
its pegging at «b».
Hold the eccentric roller (3), tool [1] and tighten the screw (1) to 4.3 m.daN.
Remove the tool [2].
Rotate the crankshaft 4 times in the direction of rotation.
Check that it is possible to peg at «b», tool [3].
If not possible to peg, restart the adjustment.
B1BP1YMD
To Next Page
Loading...
