167
ENGINE
B1EP18UD
B1BP3ACD
AUXILIARY EQUIPMENT DRIVE BELT
Engines: 9HX - 9HY - 9HZ
Tools.
[1] Dynamic tensioner roller lever (DV6 TED4 engine) : (-).0194-E3
[1a] Dynamic tensioner roller lever (DV6 ATED4 engine) : (-).0194-E1
[1b] Lever extension (DV6 ATED4 engine) : (-).0194-E2
[2] Dynamic tensioner roller locking peg : (-).0194-F
IMPERATIVE: Respect the safety and cleanliness requirements specific to High pressure
Diesel injection (HDi) engine versions.
Markings on the dynamic tensioner roller.
«a» position «maximum wear» of the auxiliaries drive belt.
«b» Nominal position.
Removing.
WARNING: Mark the direction of fitting of the auxiliaries drive belt in the case of re-use of
the belt.
Compress the dynamic tensioner roller (1) by acting at «c»
(clockwise)
, using tool [1].
Peg using tool [2] at «d».
Keep the dynamic tensioner roller (1) compressed and remove the auxiliaries drive belt.
C4
To Next Page
Loading...
