62
ENGINE
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Cylinder head
Valve cover screws (*)
1 Pre-tightening 0,5
Tightening 1,1 ± 0,1
2 Oxygen sensor 4,7 ± 0,5
3 Exhaust manifold nuts 3,5 ± 0,3
4 Coolant outlet housing fixing nuts 1 ± 0,1
5 Coolant outlet housing bolts 0,3
6 Motorised butterfly housing fixing screws 0,8 ± 0,1
7 Inlet manifold fixings 2,2 ± 0,4
8 Inlet manifold fixing studs 0,8 ± 0,2
Cylinder head bolts (*)
Pre-tightening 1 1,5 ± 0,1
Pre-tightening 2 5 ± 0,5
9 Angular slacken 360°
Tightening 2 ± 0,2
Angular tightening 285° ± 5°
10 Sparking plugs 2,7 ± 0,2
Engine: RFJ
B1BP35MP
(*) = IMPERATIVE: Respect the tightening sequence
(see following page).
C4
To Next Page
Loading...
