158
ENGINE
B1BP234C
XSARA PICASSO
AUXILIARY EQUIPMENT DRIVE BELT
Engine: NFV
Without air conditioning
Tools.
[1] Pliers for removing plastic pegs : 7504 -T
[2] Belt tension measuring instrument : 4122 -T
[3] TORX spanner
Remove.
Release the central screw (1), tool [3].
Detension the tensioner roller (2)
(flat spanner 27 on flat)
.
Remove the belt.
Refit.
Position the belt.
Hold the belt in position using the tensioner roller (2).
Pre-tension the belt 120 SEEM units, tool [2].
Lock the central screw (1) tool [3].
Remove the tool [2].
Rotate the crankshaft 2 to 4 times.
Check the tension, 120 SEEM units.
If not, restart the operation.
To Next Page
Loading...
