165
ENGINE
XSARA
AUXILIARY EQUIPMENT DRIVE BELT
Tools.
[1] Dynamic tensioner compression lever : (-).0188.Z
[2] Peg for dynamic tensioner roller : (-).0194.F
Removing.
IMPERATIVE: Respect the safety and cleanliness requirements specific to High pressure
Diesel injection (HDi) engine versions.
Remove:
- the front RH wheel.
- the sound insulation under the engine.
- the splash-shield.
WARNING: Mark the direction of fitting of the accessories belt if it is to be re-used.
Compress the dynamic tensioner roller (1) by acting at «a»
(clockwise)
, using tool [1].
Peg at «b». using tool [2].
Keep the dynamic tensioner roller (1) compressed and remove the auxiliaries drive belt.
IMPERATIVE: Check that the rollers (1) and (2) can turn freely
(without play and without
tight spots)
.
B1BP2VZD
Engines: 8HX - 8HZ
To Next Page
Loading...
