185
ENGINE
Tools.
[1] Flywheel peg : 4507-T.A
[2] Camshaft pulley peg : 4507-T.B Toolkit 4507-T
[3] Square : 4507-T.J
[4] Belt tension measuring instrument : 4122-T
[5] Valve rocker thrust plate : 4533-T.Z
Checking the timing.
Peg the flywheel, using tool [1].
Peg the camshaft pulley, using tool [2].
Setting the timing.
NOTE: Remove the sparking plugs, to ease rotation of the crankshaft.
Rotate the engine by means of the crankshaft screw (1).
Peg the camshaft pinion.
Peg the flywheel
Slacken the nut (2).
Fullt detension the belt by acting on the tensioner roller.
Remove the belt.
IMPERATIVE: Check that the tensioner roller turns freely
(no tight spot).
CHECKING AND SETTING THE VALVE TIMING
Engines: KFW - NFV
B1EP067C B1EP066C B1EP068C
XSARA - XSARA PICASSO
To Next Page
Loading...
