259
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine: WJY
Tools.
[1] Pliers for remving plastic pins : 7504-T or (-).1311
[2] Flywheel peg : 7014-T.J or (-).0188 Y
[3] Injection pump setting peg Ø 6 mm : (-).0188 H
[4] Screw H M8 : (-).0188 E
[5] Belt retaining pin : (-).0188 K
[6] Square for adjusting belt tension : (-).0188 J1
[7] Belt tension measuring instrument, with digital display : SEEM CTG 105.5M
Checking the timing.
Peg the flywheel, using tool [2].
Peg the camshaft hub, using tool [4].
Peg the injection pump hub, using tool [3].
IMPERATIVE: If the pegging proves impossible, repeat the setting of the timing.
B1BP2FTC
B1EP16PD
XSARA
To Next Page
Loading...
