351
CLUTCH
GEARBOX
TRANSMISSION
RECOMMENDATIONS/PRECAUTIONS: AL4 AUTOMATIC GEARBOX (SHIFT LOCK)
Engines: NFU - RFJ
C5FP0NZC
C5FP0P0C
SHIFT LOCK.
The «shift lock» is a system that locks the gear selection lever in position «P».
Unlocking the «SHIFT LOCK»
(normal operation).
Switch on the ignition.
Press the brake pedal and keep it pressed.
Move the gear selection lever out of position «P».
Unlocking the «SHIFT LOCK»
(with an operating fault)
.
NOTE: It is impossible to unlock the «shift lock» with the «Normal operation»
method.
The fault may originate from one of the following components:
- «Shift lock».
- Gear lever position switch.
- Automatic gearbox ECU.
- Electrical harnesses.
- Battery voltage.
Remove:
- The gear lever cover (1)
(pull upwards)
.
- Unlock the «shift lock» by pressing at “a” with the aid of a screwdriver.
- Move the gear selection lever out of position «P».
C4
To Next Page
Loading...
