380
AXLES
SUSPENSION
STEERING
XSARA TIGHTENING TORQUES: FRONT AXLE
Tightening torques (m.daN).
(1) Damper nut : 4,5 ± 0,4
(2) Cup screw : 2,5 ± 0,3
(3) Suspension leg
(4) Anti-roll bar link rod upper ball-joint : 3,7 ± 0,3
(5) Suspension leg pivot
(hollow pivot)
: 4,5 ± 0,5
(5) Suspension leg pivot
(pivot «H»)
: 5,5 ± 0,5
(6) Anti-roll bars : 3,7 ± 0,3
(7) Anti-roll bar link rod lower ball-joint
(8) Pivot lower ball-joint : 4 ± 0,4
(9) Driveshaft nut : 32,5 ± 2,5
(10) Wheel bolt : 9 ± 1
(11) Lower arm front mounting : 7,6 ± 0,7
(12) Lower arm rear mounting and anti-roll bar bearing : 6,8 ± 0,6
(13) Screw under rear mounting : 3,1 ± 0,3
(14) Ball-joint fixing on lower arm : 5 ± 0,5
Subframe to bodyshell fixing screw : 8,5 ± 0,8
B3CP040P B3CP041D
Vehicles from RPO 8667 # are all
equipped as standard with ventilated
discs.
To Next Page
Loading...
