86
ENGINE
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Cylinder head
1 Exhaust manifold stud 0,7 ± 0,1
Exhaust manifold nuts
2 Tightening on heat shield 2,5 ± 0,2
Tightening apart from on heat shield 3,5 ± 0,3
3 Oxygen sensor 4,7 ± 0,5
Coolant outlet housing fixing
4 Tightening of the nuts 1 ± 0,2
Tightening of the screws 1 ± 0,1
5 Thermostat fixing screw 0,8 ± 0,1
6 Coolant outlet housing fixing stud 0,3 ± 0,1
7 Engine coolant temperature sensor 1,7 ± 0,1
8 Motorised butterfly housing fixing screws 0,8 ± 0,1
9 Inlet manifold screws 2,2 ± 0,4
10 Inlet manifold fixing nuts 2,2 ± 0,5
11 Inlet manifold stud 0,8 ± 0,1
Engine: RFK
B1BP35QP
(*) = IMPERATIVE: Respect the tightening sequence
(see following page).
C4
To Next Page
Loading...
