315
CLUTCH
GEARBOX
TRANSMISSION
CLUTCH SPECIFICATIONS
Engines: KFU - NFU - RFN - RFJ - RFK - 9HX - 9HY - 9HZ - RHR
NOTE: All the clutches are «push» type with hydraulic control.
NOTE: The DV6TED4 and DW10BTED4 engines are equipped with a double damping flywheel (DVA).
Description.
The declutch control has a declutch fork with a ball-joint on the axis.
(1) The ball-joint is screwed into the clutch casing
(2) Declutch fork
(3) Clutch casing
(4) Bearing
(5) Clutch plate
The clutch control slave cylinder (7) is fixed by two screws (6) into the exterior of the clutch casing.
B2BP047C
B2CP3FAC
C4
To Next Page
Loading...
