358
CLUTCH
GEARBOX
TRANSMISSION
RECOMMENDATIONS/PRECAUTIONS: AL4 AUTOMATIC GEARBOX (SHIFT LOCK)
SHIFT LOCK.
NOTE: The «shift lock» is a system that locks the gear selection lever in position «P».
Unlocking the «SHIFT LOCK»
(normal operation)
.
- Switch on the ignition.
- Press the brake pedal and keep it pressed.
- Move the gear selection lever out of position «P».
Unlocking the «SHIFT LOCK»
(with an operating fault)
.
NOTE: It is impossible to unlock the «shift lock» with the «Normal operation» method.
The fault may originate from one of the following components:
- «Shift lock».
- Gear lever position switch.
- Automatic gearbox ECU.
- Electrical harnesses.
- Battery voltage.
Remove:
- Unlock the «shift lock» by pressing at «a» with a screwdriver placed in the gear
selection control gate.
- Move the gear selection lever out of position «P».
Engine: RFN
XSARA PICASSO
B2CP3N8C
To Next Page
Loading...
