375
AXLES
SUSPENSION
STEERING
XSARAAXLE GEOMETRY
Front and rear measuring points - RPO 8667 #
XSARA ALL TYPES
Front height
Rear height
H1 = Dimension between the centre of the front suspension arm
mounting and the ground.
R1 = Front wheel radius under load.
L1 = Distance between the centre of the wheel and the centre of the
front suspension arm mounting.
B3CP06ZD
H2 = Dimension between the contact face of the rear mounting and
the ground.
R2 = Rear wheel radius under load.
L2 = Distance between the centre of the wheel and the contact face of
the rear mounting on the bodyshell.
To Next Page
Loading...
