377
AXLES
SUSPENSION
STEERING
ESSENTIAL: When checking the suspensions, the vehicle should be at reference height.
XSARA
AXLE GEOMETRY
Values of the front and rear suspensions, at reference height - RPO 8667 #
Tools used.
Compress the suspension, to obtain the values at reference height.
[1] Set of two suspension compressors : 9511-T.A
[2] Set of four straps : 9511-T.B
[3] Set of four shackles : 9511T.C
A> B =Negative figure: – = TOE-OUT
A < B = Positive figure: + = TOE-IN
NOTE
B3CP04LC
To Next Page
Loading...
