148
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine: XFW
Refitting (continued).
Position the belt on the guide roller (13), belt at (C) well tensioned.
NOTE: Carefully turn the camshaft pinion in the opposite direction to the rotation of the
engine in order to engage the belt on the pinion.
Engage the belt on the LH exhaust camshaft pinion (17).
IMPERATIVE: The angular displacement value of the pinion relative to the timing belt
should not be greater than the width of one tooth.
Engage the belt on the LH inlet camshaft pinion (18), as before.
Refit the roller (12), tighten to 8 ± 0,8 m.daN.
B1EK00BD
B1EK00AD
C8
Angl.T3-page032-190-2005 4/02/05 15:15 Page 148
To Next Page
Loading...
