160
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine: 9HZ
B1EP1E6D
Move aside the electrical harness (7).
Remove:
- The engine support (8).
- The screw (10).
- The accessories drive pulley (9).
- The lower timing cover (11).
- The upper timing cover (12).
- The tool [1].
Refit the screw (10).
Turn the crankshaft to bring the camshaft to its pegging point.
Peg the camshaft at «c», using tool [2] (oil the pegs).
WARNING: Do not damage or bear against the track of the target of the engine speed sensor (13).
Peg the crankshaft at «e», using tool [3].
Remove the timing belt protector (13) and the engine speed sensor (14).
Slacken the screw (12) of the tensioner roller and keep it slackened using an allen spanner at «d».
Detension the timing belt by pivoting the tensioner roller (clockwise).
Remove the timing belt, starting with the coolant pump pinion.
C5
B1EP1E3D
Angl.T3-page032-190-2005 4/02/05 15:15 Page 160
To Next Page
Loading...
