Clack WS2H - Button Function and Programming Key Sequence

Page 10 WS2H and WS3 Manual
Standby LED
• Signals that a unit is not in service,
or regen
• Flashes to alert status conditions
- 1 per second indicates flow had
been detected while the unit was
offline
- 2 per second indicates the bypass
override switch is being used to
force the unit offline.
Online LED
• Signals that a unit is currently in
service
• Flashes to alert status conditions
- 2 per second indicates the bypass
override switch is being used to
force the unit online.
Regen LED
• Signals that a unit is currently in
regen
BUTTON FUNCTION AND PROGRAMING KEY SEQUENCE