WS2H and WS3 Manual Page 39
INSTALLATION SUMMARY
Installation Date: ___________________________________________
Installation Location: _______________________________________
Installer(s): ________________________________________________
Phone Number:
Application Type: (Softener) __________Other: _____________
Water Source: ____________________________________________
Water Test Results:
Hardness: ______________Iron: _______________pH: ___________
Other: ____________________________________________________
__________________________________________________________
Misc:
Service Flow Rates: min. ______________ max. ______________
Tank Size: Diameter ______________ Height: __________________
Resin or Media Volume: ____________________________________
Resin or Media Type: _______________________________________
Capacity: _________________________________________________
Salt or Fill Setting per Regeneration: _________________________
Brine Tank Size: ___________________________________________
Control Valve Con guration:
Valve Type:________________________________________________
Valve Part Number: ________________________________________
Valve Serial Number: _______________________________________
Regenerant Re ll Control: _________________________ gpm/lpm
Injector Size: ______________________________________________
Drain Line Flow Control: __________________________ gpm/lpm
To Next Page
Loading...
Need help?
General
