Page 24 WS2H and WS3 Manual
TIMER SCREENS
Accessed by pressing NEXT and DOWN simultaneously for >3 seconds, then by pressing
NEXT and DOWN simultaneously again for >3 seconds.
1 or 2 will be displayed if set for
Alternate Regenerations in Cycle
Setup 2.
TIMER 1A
Select runtime of cycle 1.
TIMER 1B
Select runtime of cycle 2.
TIMER 1A2
If Alternate Regenerations has been selected in Cycle Setup 2, select runtime of Alternate
Regeneration Cycle 1.
TIMER 1B2
Select runtime of Alternate Regeneration, cycle 2.
Cycle Units Range Increments
Backwash Minutes
1-30
30-95
1
5
Draw Minutes
1-30
30-100
100-180
1
5
10
Slow Rinse Minutes
1-30
30-95
1
5
Rinse Minutes
1-30
30-95
1
5
Fill Minutes
0.1-10.0
10.0-30.0
30.0-99.0
0.1
0.2
1.0
Hold Minutes
1-30
30-100
100-480
0.1
2.0
10.0
TIMER 1A
TIMER 1B
TIMER 1A2
TIMER 1B2
To Next Page
Loading...
