3.1.2 LQ Series front panel power display
LQ throw-down units
If the device is using the PSU, this will
be lit up instead of the PoE indicator.
LQ-R 1 RU units
3.1.3 Power 2-wire beltpacks from the partyline
2-wire partyline beltpacks take power from the partyline. The maximum numbers
are shown in the table below.
LQ series unit Power supply mA supplied to the 2-wire interface
(number of beltpacks powered by the
partyline)
LQ 24 watts 150 mA (~5 beltpacks)
LQ PoE 70 mA (~2 beltpack)
LQ-R 60 watts 250 mA (~10 beltpacks per pair of ports,
max 20 per device)
To Next Page
Loading...
