4.2 Overview page
Figure 4-1 Overview page
As LQ devices are added to the group, they will appear in this screen. To access
the configuration and control options for any one of the units in the group, click on
the device object.
Note: The Home button takes you to the General page of the device your browser is
connected to (the host device).
Note: There is a navigation bar at the top of the page: Home, Overview,
Assignments.
Note: Please note that the device icon has a power indicator. See 3. Powering your LQ™
for more information on powering your device.
4.3 Device configuration
Once the units have joined a Link-Group, the devices can be configured either
directly or by proxy, meaning that the configuration operations for a unit are
routed through the host device. The host device is the unit which a browser is
currently directed to (see Figure 1-7 Configuring a Link-Group from any
device in Overview).
• The Home button will always take you to the host device’s configuration
page.
• Proxy configuration can be accomplished by clicking on any device within
the Devices page.
Host device
(orange highlight)
Overview button
Note: The orange
highlight shows
which device the
browser is
currently
connected to.
Linked units appear in this screen
Navigation
bar
Link-Master
Power indicator
To Next Page
Loading...
Need help?
General
