4 Core Configuration Manager (CCM) walk-
through
LQ units can be configured and controlled from the Web-based Core Configuration
Manager. This includes all main functions:
• Linking units
• Network settings
• Port configuration
• Configuring of audio and signalization routing throughout the LQ-Group
• Adjusting network quality settings on a per port basis
• System monitoring and control
• Upgrading LQ units.
To access the Core Configuration Manager, enter the IP address of the LQ, as
displayed on the front panel, into the URL field of your browser. If the unit is
reachable over your network, this will take you to the Overview page of the CCM
that is served by the unit.
Note: Default username and password for the CCM: admin, admin.
4.1 Minimum requirements for the CCM
Supported on the latest versions of all major web browsers (i.e. Google Chrome,
Safari, Firefox, Internet Explorer).
To Next Page
Loading...
