3) Navigate to Linking for that device.
4) Click Change Role to Link-Member.
5) Apply Changes.
The device will be reconfigured as a Link-Master and removed from the group.
5.7.2 Remove an off-line Link-Member from a group
1) Access the Core Configuration Manager for any device within the Link-Group.
2) In the Overview page, the off-line unit will show a red ‘X’. Click on this
device.
3) You will be asked if you want to remove this unreachable device. Click
Delete.
The device will be removed from the Link-Group. It will not be reconfigured as a
Link-Master.
To Next Page
Loading...
