To Next Page

To Previous Page

BIOS Utilities

5 - 14 Setup Utility - Advanced Menu

FlexiCharger Enable (Advanced Menu > Advanced Chipset Control)

The sub-menu here allows you to enable/disable the FlexiCharger. The FlexiCharg-

er may be set to automatically start charging your battery when the battery reaches

a certain capacity level (e.g. you could start the battery charge level at 40%).

You can then set the level to stop charging (e.g. 100%), and of course this stop

charge level must be higher then the start charge level.

See the sidebar warning for information on running the FlexiCharger for an ex-

tended period as this is not recommended.

GPU Performance Scaling (Advanced Menu > Advanced Chipset Control)

You can enable/disable NVIDIA GPU Performance scaling from this menu. The

NVIDIA Card does the scaling if this option is on, and has less latency than the Intel

GPU. This can be useful if you play games etc.



FlexiCharger

Warning

If you leave the FlexiCh-

arger continuously "En-

abled” for a period of

three months or more,

the battery meter's read-

ing accuracy will deteri-

orate.

To reset this, set the

FlexiCharger to "Dis-

abled", and then allow

the battery to completely

discharge (see “Battery

FAQ” on page 3 - 21)

before enabling the

function again.

Figure 5 - 10

Advanced Chipset

Control >

FlexiCharger

Clevo P955ET Series User Manual

Questions and Answers: