BIOS Utilities
Setup Utility - Security Menu 5 - 19
5
TPM Configuration (Security Menu)
This sub-menu will allow you to enable/disable Trusted Platform Module (TPM)
support, and to configure the TPM State. Select TPM Configuration and press En-
ter to access the sub-menu. Press Enter to access the Security Device Support menu
and select Enable to support TPM. To reset the TPM select Clear TPM to clear ex-
isting TPM information (see “Trusted Platform Module” on page 6 - 46).
Figure 5 - 12
Security Menu
TPM Configuration
To Next Page
Loading...
Need help?
General
