Chapter 3: To use easyMail
36 Work with messages
To use default messages
You can write a default message that you can recall and send by pressing
one of the F-keys F1 to F8.
Create a default message
To create a default message, do as follows:
1. Open the message editor.
2. Type in your message.
3. Select Messaging > Default messages.
4. Select the F-key you want to use for the message.
5. Type a name for the message.
6. Click Save and close.
Send a default message
To recall and send the message, fill in the message recipient and a subject
in the editor To... field and press the F-key you selected above.
The Subject field is important - some messages may not be
received correctly if the subject is missing.
To Next Page
Loading...
