Codonics Virtua - Study Fields Included on Labels

8-6 Working with Labels
The printed labels have study blocks reserved for printing study
information. Each study block has either three or four fields
available for information, depending on the template.
When the automatic label selection feature is being used, the
following rules determine how many fields each study will have on
the disc label:
• If the label is for discs that will have three studies or less, four
study information fields can be included.
• If the label is for discs that will have four to ten studies, three
fields can be included.
The file fields.default.txt in the \profiles\labels directory on the
SmartDrive controls what information will be printed for each field
in a study. This file has section identifiers for 3- and 4-field study
blocks. You can specify which fields to include for each of these
block sizes and in what order they appear.
To include a field, enter an integer value for that field. The integer
value indicates at which line in the study block that the field’s
information will be inserted.
The default contents of the fields.default.txt file is:
[3FieldStudies]
patientName=1
patientID=
studyDate_Modality=2
studyDescription=3
referringPhysician=
patientDOB=
[4FieldStudies]
patientName=1
patientID=2
studyDate_Modality=3
studyDescription=4
referringPhysician=
patientDOB=
Study Fields Included on Labels