ComAp IGS-NT Series User Manual

InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
193
Description
This setpoint adjusts the mode of the Timer channel #4. Output from this
channel is available in the combined output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
12.2.13.5 Setpoint: Timer channel 5
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #5. Output from this
channel is available in the combined output TimerAct 5-8.
NOTE:
See the chapter Timers for more details about timers.
12.2.13.6 Setpoint: Timer channel 6
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #6. Output from this
channel is available in the combined output TimerAct 5-8.
NOTE:
See the chapter Timers for more details about timers.
12.2.13.7 Setpoint: Timer channel 7
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #7. Output from this
channel is available in the combined output TimerAct 5-8.
NOTE:

ComAp IGS-NT Series Specifications

General

Brand	ComAp
Model	IGS-NT Series
Category	Controller
Language	English