InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
13.1.1.34 Value: BusL V [kV]
This value shows measured BusL voltage in kV.
13.1.2 Group: BusR values
13.1.2.1 Value: BusR freq
BusR frequency. The frequency is measured in the phase L3.
13.1.2.2 Value: BusR V L1-N
BusR voltage in phase L1.
NOTE:
The ratio between the voltage measured at the input terminals and the
displayed voltage is adjusted by the setpoint BusR VT ratio.
13.1.2.3 Value: BusR V L2-N
BusR voltage in phase L2.
To Next Page
Loading...
Need help?
General
