InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
corresponding address is not available (does not exist of function on the CAN
bus) value "#####" is diplayed.
13.1.3.21 Value: Gen-set21 pwr
This value shows the actual power of corresponding genset (i.e. power of
genset with CAN address 1 is shown in Gen-set1 pwr). If genset with
corresponding address is not available (does not exist of function on the CAN
bus) value "#####" is diplayed.
13.1.3.22 Value: Gen-set22 pwr
This value shows the actual power of corresponding genset (i.e. power of
genset with CAN address 1 is shown in Gen-set1 pwr). If genset with
corresponding address is not available (does not exist of function on the CAN
bus) value "#####" is diplayed.
13.1.3.23 Value: Gen-set23 pwr
This value shows the actual power of corresponding genset (i.e. power of
genset with CAN address 1 is shown in Gen-set1 pwr). If genset with
corresponding address is not available (does not exist of function on the CAN
bus) value "#####" is diplayed.
13.1.3.24 Value: Gen-set24 pwr
To Next Page
Loading...
Need help?
General
