ComAp IGS-NT Series User Manual

InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
319
15.2.1.82 Binary output: RemoteControl1
Related FW
3.0
Description
This is a general purpose output, which can be closed and opened remotely,
e.g. from InteliMonitor using the "Remote switches" tool or via MODBUS
using the register #46361 and command #26.
NOTE:
See the Remote switches chapter in the InteliMonitor help for details about
how to control the output from InteliMonitor and the Modbus chapter in the
latest communication guide for information about control the output using
Modbus.
15.2.1.83 Binary output: RemoteControl2
Related FW
3.0
Description
This is a general purpose output, which can be closed and opened remotely,
e.g. from InteliMonitor using the "Remote switches" tool or via MODBUS
using the register #46361 and command #26.
NOTE:
See the Remote switches chapter in the InteliMonitor help for details about
how to control the output from InteliMonitor and the Modbus chapter in the
latest communication guide for information about control the output using
Modbus.
15.2.1.84 Binary output: RemoteControl3
Related FW
3.0
Description
This is a general purpose output, which can be closed and opened remotely,
e.g. from InteliMonitor using the "Remote switches" tool or via MODBUS
using the register #46361 and command #26.
NOTE:
See the Remote switches chapter in the InteliMonitor help for details about
how to control the output from InteliMonitor and the Modbus chapter in the
latest communication guide for information about control the output using
Modbus.
15.2.1.85 Binary output: RemoteControl4
Related FW
3.0

ComAp IGS-NT Series Specifications

General

Brand	ComAp
Model	IGS-NT Series
Category	Controller
Language	English