ComAp InteliDrive Lite User Manual

ID–Lite-2.0 User guide, ©ComAp – January 2011 71
ID-Lite-2.0 User guide.pdf
- Separate RPM-BI3 underspeed Wrn and Sd protection when Engine protect: GearBoxRatio =
0,0.
- Difference check between RPM and RPM3 with calculation of gear-box transmition ratio when
Engine protect: GearBoxRatio > 0,0. Protection is active when engine is Ready to load.
Step: 0,1
Range: 0,0 – 5,0
Hint:
The RPM-BI3 measuring and corresponding protections are switched off when Basic setting:
GearTeethBI3 = 0. In this case BI3 operates as standard Binary input.
RPMdiff Sd [ - ]
RPM-BI3 Sd underspeed protection limit or Sd difference limit between RPM-BI3 and RPM transferred
via GearBoxRatio. See description in GearBoxRatio setpoint.
Message: Sd RPMdiff
Step: 1
Range: 1 – 1000
RPMdiff Wrn [ - ]
RPM-BI3 Sd underspeed protection limit or Sd difference limit between RPM-BI3 and RPM transferred
via GearBoxRatio. See description in GearBoxRatio setpoint.
Message: Wrn RPMdiff
Step: 1
Range: 1 – 1000
RPMdiff delay [ - ]
Delay for RPMdiff protections above. See description in GearBoxRatio setpoint.
Step: 1 s
Range: 0 – 600 s
Date/Time
Time stamp per [min]
Time interval for periodic history records.
Step: 1 min
Range: 0 – 200min
SummerTimeMod [ DISABLED / WINTER / SUMMER / WINTER-S /
SUMMER-S ]
DISABLED: Automatic switching between summer and wintertime is disabled.
WINTER (SUMMER) : Automatic switching between summer and wintertime is enabled and it is set to
winter (summer) season.

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English