ComAp InteliDrive Lite - Recommended Wiring; ID-Lite - Wiring Example

ID–Lite-2.0 User guide, ©ComAp – January 2011 28
ID-Lite-2.0 User guide.pdf
Recommended wiring
ID-Lite – Wiring example
All engine data are transferred from ECU via CAN J1939 interface in example below. The extension
IGL-RA15 modules can be connected to CAN bus together with ECU.
DIESEL/ GAS ENGINE
RS-232C Interface
Modemor PC
ECU
+24 V
BINARY OUTPUTS
Hint:
It is possible to start Volvo and Scania engines via CAN bus. See Engines started via CAN bus.