ID–Lite-2.0 User guide, ©ComAp – January 2011 13
ID-Lite-2.0 User guide.pdf
See the IL-NT-GPRS Quick Guide how to start using IL-NT-GPRS module.
IL-NT RD Remote display
IL-NT RD is remote display for controller. Remote display provides the same control and monitoring
functions as controller itself. No programming of the display is required – unit is self configurable from
main controller. It is connected with controller via RS232 line. Longer distances (up to 1200m) are
possible when RS232/RS485 converters are used.
Remote annunciator IGL-RA15
The remote annunciator IGL-RA15 can be connected to the ID-Lite unit via CAN bus. Any of the binary
outputs can be configured (using LiteEdit (3.0 or higher) software) to each LED diode on the RA15.
The module (just one) can be also enabled and configured using LiteEdit software.
Just Warning alarm is indicated when communication to RA15 is interrupted.
See the documentation of IGL-RA15 for the technical and function description.
To Next Page
Loading...
