InteliLite Global Guide
99
Not Ready RPM < 2, Oil pressure not detected,
Generator voltage < 10V, D+ not
Active no shutdown alarm active,
other than OFF Mode selected
Ready
Prestart Prestart time elapsed FUEL SOLENOID (PAGE 602) on,
STARTER (PAGE 633) on, Maximum
Cranking Time (page 206) counter
started
Cranking
Cranking RPM > Starting RPM STARTER (PAGE 633) off, PRESTART
(PAGE 621) off
Starting
D+ input activated or oil pressure
detected or Generator voltage >
25% Nominal voltage
STARTER (PAGE 633) off, PRESTART
(PAGE 621) off
Cranking
Maximum Cranking Time (page
206), 1st attempt
STARTER (PAGE 633) off, FUEL
SOLENOID (PAGE 602) off, STOP
SOLENOID (PAGE 634) on, Cranking
Fail Pause (page 206) timer started
Crank
pause
Maximum Cranking Time (page
206) elapsed, last attempt
STARTER (PAGE 633) off, PRESTART
(PAGE 621) off
Shutdown
(Start fail)
Crank pause Cranking Fail Pause (page 206)
elapsed
STARTER (PAGE 633) on, FUEL
SOLENOID (PAGE 602) on, STOP
SOLENOID (PAGE 634) off, Maximum
Cranking Time (page 206) counter
started
Cranking
Starting Idle Time (page 214) elapsed Minimal Stabilization Time (page
216) and Maximal Stabilization
Time (page 217) counter started
Running
any shutdown condition FUEL SOLENOID (PAGE 602) off,
STOP SOLENOID (PAGE 634) on
Shutdown
all cranking attempts elapsed FUEL SOLENOID (PAGE 602) off,
STOP SOLENOID (PAGE 634) on
Shutdown
(Start fail)
Running Stop request READY TO LOAD (PAGE 623)
off,Cooling Time (page 219)
counter started
Cooling
RPM = 0 or any other shutdown
condition
READY TO LOAD (PAGE 623) off,
FUEL SOLENOID (PAGE 602) off
Shutdown
GCB CLOSE/OPEN (PAGE 604)
closed
Loaded
Loaded GCB CLOSE/OPEN (PAGE 604)
opened
Running
RPM = 0 or any other shutdown
condition
FUEL SOLENOID (PAGE 602) off,
STOP SOLENOID (PAGE 634) on,
READY TO LOAD (PAGE 623) off,
Shutdown
To Next Page
Loading...
