ComAp InteliMains NT IM-NT-BB - Page 365

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
365
NOTE:
See the chapter Timers for more details about timers.
13.2.1.53 Binary input: Timer block 8
Related FW
standard v3.1.0
Description
This input is used to disable temporarily the output from the Timer channel
#8.
NOTE:
See also the setpoint TimerChannel 8 and output TimerAct 5-8.
NOTE:
See the chapter Timers for more details about timers.
13.2.1.54 Binary input: Timer block 9
Related FW
standard v3.1.0
Description
This input is used to disable temporarily the output from the Timer channel
#9.
NOTE:
See also the setpoint TimerChannel 9 and output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
13.2.1.55 Binary input: Timer block 10
Related FW
standard v3.1.0
Description
This input is used to disable temporarily the output from the Timer channel
#10.
NOTE:
See also the setpoint TimerChannel 10 and output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.