ComAp InteliMains NT IM-NT-BB - Page 366

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
366
13.2.1.56 Binary input: Timer block 11
Related FW
standard v3.1.0
Description
This input is used to disable temporarily the output from the Timer channel
#11.
NOTE:
See also the setpoint TimerChannel 11 and output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
13.2.1.57 Binary input: Timer block 12
Related FW
standard v3.1.0
Description
This input is used to disable temporarily the output from the Timer channel
#12.
NOTE:
See also the setpoint TimerChannel 12 and output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
13.2.1.58 Binary input: Timer block 13
Related FW
standard v3.1.0
Description
This input is used to disable temporarily the output from the Timer channel
#13.
NOTE:
See also the setpoint TimerChannel 13 and output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.