InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
13.2.1.59 Binary input: Timer block 14
This input is used to disable temporarily the output from the Timer channel
#14.
NOTE:
See also the setpoint TimerChannel 14 and output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
13.2.1.60 Binary input: Timer block 15
This input is used to disable temporarily the output from the Timer channel
#15.
NOTE:
See also the setpoint TimerChannel 15 and output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
13.2.1.61 Binary input: Timer block 16
This input is used to disable temporarily the output from the Timer channel
#16.
NOTE:
See also the setpoint TimerChannel 16 and output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
13.2.1.62 Binary input: ExtValue1 up
To Next Page
Loading...