ComAp InteliNano NT Plus

InteliNano-NT Plus, SW version 2.0.1.x, ©ComAp – July 2015
51
Datcon Level %
Ohm
%
1
33,5
100
2
103
50
3
240
0
I22
Low Oil Pressure
When this binary input is activated the red LED above Stop button will blink, the general shutdown
symbol will be displayed on LCD’s upper right corner, the oil pressure symbol will be displayed on
event log with running hours stamp, and the shutdown procedure will occur. For more details see
Shutdown procedure in chapter 12 Alarm, Events and History Management.
Evaluation of the protection is delayed for 1s.