ComAp InteliNano NT Plus

InteliNano-NT Plus, SW version 2.0.1.x, ©ComAp – July 2015
54
Datcon 7 Bar
Ohm
Bar
1
33,5
6,9
2
153
1,7
3
240
0
4
350
0
Datcon 10 Bar
Ohm
Bar
1
33,5
10,3
2
153
2,6
3
240
0
4
350
0
I24
High Coolant Temperature
When this external binary input is activated the red LED above Stop button will blink, the general
shutdown symbol will be displayed on LCD’s upper right corner, the Coolant Temperature symbol will
be displayed on event log with running hours stamp, and the shutdown procedure will occur. For more
details see Shutdown procedure in chapter 12 Alarm, Events and History Management.