ComAp InteliVision 8 User Manual

InteliVision 8
15
Image 3.8 Change of mode
3.8 How to change setpoints?
To change setpoints:
1.
Press Setpoints button.
2.
To scroll/see all setpoints groups, use buttons to scroll menu (when context menu is active).
3. Select a setpoint group by pressing the context button on the right side of the display (e.g. Basic settings
button).
4.
To select a certain setpoint use and/or ↑ ↓ buttons (when context menu is NOT active) and press
Enter. A dialog for setpoint value adjustment appears.
5. Use → ← buttons to go to the character position.
6. To change a value of the setpoint use ↑ ↓ buttons and press Enter
Note: If you insert a wrong value (which is e.g. out of range), the field colours in red.
You can find more information about setpoints in Setpoints screens (page 40)
3.9 How to find alarms?
To find alarms:
1.
If they do not appear automatically, press AlarmList button.
2.
To go through alarms press ↑ ↓ or buttons.
You can find more information about alarms inAlarmList screen (page 43).
Note: When a new alarm appears the AlarmList page is displayed automatically only when the actual GUI
position is Home metering screen. From the other GUI location the AlarmList button must be pressed.

ComAp InteliVision 8 Specifications

General

Brand	ComAp
Model	InteliVision 8
Category	Monitor
Language	English