ComAp InteliVision 8 User Manual

InteliVision 8
71
9 Installation
9.1 Terminals and dimensions 71
9.2 Mounting system 72
9.3 Recommended wiring 72
9.3.1 ID-Mobile wiring 74
9.4 Modules’ address combination on CAN (IG/IS-NT,ID) 75
9.4.1 IGS-NT controllers and 4 InteliVisions 8 on CAN2 76
9.4.2 ID-DCU Marine controller and up to 8 InteliVisions 8 on CAN2 76
6 back to Table of contents
9.1 Terminals and dimensions
Image 9.1 Terminal dimension

ComAp InteliVision 8 Specifications

General

Brand	ComAp
Model	InteliVision 8
Category	Monitor
Language	English