InteliVision 8
55
5.2 Support of customized logo
A customer can use the standard InteliVision 8 logo or his own customized logo on initial screen. This logo is
visible only during InteliVision initializations.
Customized logo can be imported within the frame of InteliVision.ivp during firmware upgrade using IVprog (from
version 1.1).
Logo requirement:
Name of the file has to be "logo.bmp"
It has to be in *.bmp format
Resolution 800x510 pixels
Colour depth up to 24 bits
Note: Another name than “logo.bmp” is not supported!
Note: Background with logo.bmp picture has been removed from IV info and ControllerInfo screens due to risk
that important information wouldn’t be visible in combination with different colour structure of customized
logo.bmp.
Image 5.2 Example of customized logo
To Next Page
Loading...
Need help?
General
