GENERAL DESCRIPTION
19
Comau Robotics Product Instruction
2.2 Basic functions
RoboShop program provides a Graphical User Interface including dedicated
environments for using the following functionalities:
– connecting/disconnecting to C5GPlus/R1C Control Units, at reachable IP
addresses according to the current physical connection and without any limitations
on the ports (full open ports)
– viewing files existing on the connected Control Units and the PC
– editing and translating programs in PDL2 language (.PDL file) into executable
format (.COD file)
– searching and viewing errors
– opening a Terminal window for each connected Control Unit, to directly issue
commands towards it.
– 3D viewing of all the robots controlled by the connected Control Units.
To Next Page
Loading...
