Comau Robotics Product Instruction
76
MULTICONTROL PANEL
In the window above, click Add... key, select the wished .crd file and click Ok key to
confirm.
Similarly, select the wished .crd file, click Remove key (figure above) and click Ok to
confirm, to delete it.
5.2.8.5 Translator
When selected, this checkbox states that PDL2 programs are always offline translated,
even if the Control Unit is connected. The path search specified in the Import path field
is used for variables, types and routines declared with the IMPORT clause.
5.2.8.6 FTP Server
RoboShop can interface the Control Units in FTP server modality.
To Next Page
Loading...
