Comau e.DO - Checking Warning Labels and Parts

E.DO CLEANING INSTRUCTIONS AND PERIODIC CHECKS
59
Comau Robotics Product Instruction
7.1 Periodic checks
– Check the presence and conservation state of the warning signs and labels
– Check the correct fixing of the e.DO parts
– Check the correct functioning of emergency push-buttons
7.1.1 Check the presence and conservation state of the warning
signs and labels
When is it necessary to check the warning signs and labels of e.DO?
The check of the warning signs and labels must be carried out before each use of the
Robot.
How to check the warning signs and labels of e.DO?
Check that the following warning signs and labels are present and clearly visible on the
Robot:
– “+” and “-” labels to identify the direction of rotation of the Robot axes;
– “pinching risk” labels on the Robot axes;
– “read the handbook” label on the Robot base;
– plate with CE marking on the Robot base.