WARRANTY TERMS AND CONDITIONS
63
Comau Robotics Product Instruction
9.
WARRANTY TERMS AND CONDITIONS
As an example, outside the scope of the warranty are any malfunctions deriving from:
–
use of the Robot in environments with environmental specifications not suitable for
normal operation of the Robot itself (for details consult Chap. General
technical features of the e.DO Robot);
– cases of force majeure (such as lightning, particular atmospheric agents, etc.)
– modifications of electrical power supply conditions (including voltage and current
peaks
, etc.) that are higher than the limits set in the Robot technical
documentation;
–
mechanical, electrical, software modifications not authorized by the manufacturer
(details at par. 4.2 List of allowed and not-allowed operations, in order to preserve
the warranty on pag. 4-56 of the Service Manual);
–
performance of maintenance or repair operations not authorized by the
m
a
nufacturer and indicated in the Service Manual.
The Robot is subject to different warranty conditions, depending on the methods of sale,
as in
dicated below:
– Warranty conditions for B2B (Business-to-Business) sale
– Warranty conditions for B2C (Business-to-Customer) sale
The Robot warranty is exclusively related to malfunctions or damages of the Robot itself
caused by manufacturing defects or incidents of non-compliance and applies as long as
the Robot has been installed and used correctly, in full compliance with the technical
features indicated in the technical documentation and instructions.
To activate the Robot warranty it is necessary to register on the e.DO website, at
https://edo.cloud/.
To Next Page
Loading...
